1-800-525-1609
Products: Stepper Products: Size HT24 Step Motors
 |
|
• This table shows recommended motors, which represent our most popular model types and are typically held in stock in Watsonville, CA.
• Part numbers listed are for single shaft. To order double shaft add "D" to the end of the part number. Example: HT24-100D.
• All size HT24 motors are optimized for microstepping.
| RECOMMENDED MOTORS | |||||||||||
| Part # | Motor Length (inches) |
Minimum Holding Torque (oz-in) |
Leads | Step Angle (deg) |
Volts | Amps | Ohms | mH | Rotor Inertia (oz-in2/g-cm2) |
Motor Weight (lbs) |
Outline Drawings |
| HT24-100 | 1.73 | 123.2 | 4 | 1.8 | 2.0 | 2.8 | 0.73 | 1.6 | 1.42/260 | 1.31 |
 |
| HT24-105 | 2.13 | 177 | 4 | 1.8 | 1.72 | 4.0 | 0.43 | 1.1 | 2.45/450 | 1.81 |
|
| HT24-108 | 3.35 | 354 | 4 | 1.8 | 2.6 | 4.0 | 0.65 | 2.4 | 4.91/900 | 3.00 |
|
 |
© Applied Motion Products, Inc. 2007-2009. All rights reserved.
|
|
